ENGLISH
CONTACT US
To ensure a sharp blade edge wood mill, flying knife should be replaced every 4-8h grinding, knife every half a month to replace. When replacing wood crusher knife and the tape is the best interval?
Wood shredder blades have a single blade and double blade two, wood mill blade multi-choice four-sided blade. Single-edged blade cutting easy to make the material cut into pieces; double-edged blade suitable for cutting hard materials and frozen materials. The grinding angle of the blade should be based on the material to be cut material, cutting hard or frozen material, the grinding angle should be large, and cutting tool grinding angle should be small. This talent ensures outstanding cutting quality and lowers energy consumption. Requires flying knives and knife interval between 0.8 ~ 1.5mm is appropriate.
Stripping knife Frisbee: Stripping knife made of 45 # cast steel, built-in 7/9 500/800 series bearing a plate, 4-5 stripping arm made of 45 # cast steel, front with adjustable, can Replacement of the alloy stripping knife, the rear end of the strong selection of tension spring to control the start and fall of the knife arm, the outer cutter with 4-5 C-shaped triangular groove.
Wood shredder blades have a single blade and double blade two, wood mill blade multi-choice four-sided blade. Single-edged blade cutting easy to make the material cut into pieces; double-edged blade suitable for cutting hard materials and frozen materials. The grinding angle of the blade should be based on the material to be cut material, cutting hard or frozen material, the grinding angle should be large, and cutting tool grinding angle should be small. This talent ensures outstanding cutting quality and lowers energy consumption. Requires flying knives and knife interval between 0.8 ~ 1.5mm is appropriate.
Stripping knife Frisbee: Stripping knife made of 45 # cast steel, built-in 7/9 500/800 series bearing a plate, 4-5 stripping arm made of 45 # cast steel, front with adjustable, can Replacement of the alloy stripping knife, the rear end of the strong selection of tension spring to control the start and fall of the knife arm, the outer cutter with 4-5 C-shaped triangular groove.
