The new mechanism charcoal machine equipment, is under the pressure of environmental protection produced by a new generation of products. Charcoal is very useful, such as our favorite barbecue, with the amount of charcoal will be relatively large. After the mechanism of charcoal processing of the mechanism of carbon, more and more popular in the market, because of its low cost, burning time than the traditional charcoal is to extend too much, so that both the human life or social development are occupied Very important position. In addition, the mechanism of charcoal production mechanism of carbon for the metallurgical industry, carburizing agent manufacturing, carbon disulfide production and charcoal brick suppression has a great impact.
1.Metallurgical industry
        Before the charcoal used to smelting iron ore, charcoal and coke smelting of pig iron, even if the chemical composition of the same, its structure and mechanical properties are still the same. Charcoal smelting pig iron generally has a fine particle structure, casting close, no crack characteristics, with charcoal production of pig iron with less impurities, suitable for the production of high quality steel. In the production of non-ferrous metals, charcoal is often used as surface flux, when the non-ferrous metal melting, the surface flux in the molten metal surface to form a protective layer, so that metal and gas medium separation, can reduce the molten metal splash loss, The saturation of the gas in the material.
A large amount of charcoal is also used for crystalline silicon production, the production of crystalline silicon charcoal should not contain charcoal head and too much ash.
2. Manufacture of carburizing agent
        All steel products that require a high hardness and abrasion resistance on the surface, and which have good toughness in the center, must be carburized. The carbonaceous mixture used to carburize the steel product is called a carburizing agent. Simple charcoal carburizing effect is poor. So commonly used as raw material charcoal, then add a certain amount of contact agent, made of carburizing agent.
3. Production of carbon disulfide
       Charcoal is the best raw material for the manufacture of carbon disulfide, used to make carbon disulfide charcoal, should be hard, bulky, ash and moisture content is small, fixed carbon content is high. Production of 1 ton of carbon disulfide about 0.5 tons of charcoal.
4. The suppression of charcoal bricks
       Crushed charcoal transport is very convenient, and the use is also limited, with the method of pressing charcoal brick can make a small value of charcoal into high-quality fuel. Charcoal bricks have the advantages of hygroscopicity and low water absorption, high specific gravity and high calorific value, and have high mechanical strength in the process of use. The calcined charcoal bricks are smoke-free during combustion and do not produce charcoal dust. Charcoal bricks can be used for metallurgy, mobile gasifier and so on.
       Hongrun is a professional production mechanism charcoal machine, the mechanism of carbon processing equipment manufacturers, our product design is reasonable, manufacturing quality and reliable, with a simple structure, easy operation, small size, small footprint, labor, power saving features. Design of automatic control of electric heating device, can be randomly adjusted dry material moisture to ensure that the material forming stability, and less energy consumption, high production efficiency. The main parts of the wear-resistant materials with a special treatment, it can be continuously suppressed production, durable. Welcome to visit.

 TEL:+8613592505674
E-MAIL:sales@hwdcrusher.com
http://www.hwdcrusher.com/