ENGLISH
CONTACT US
Charcoal machine is a carbon equipment machine, in the process of carbon manufacturing process of raw material temperature control is very strict, strict control of raw material temperature directly determines the quality of the quality of carbon products. In the humidity control of these raw materials, the most intuitive way is to readily grasp a material clenched and then spread out, check the sawdust is not able to lax, if the raw materials were sticky to the humidity of more than 12%, is not suitable for charcoal Of the water is too high on the rod is not good, there will be cracks in the appearance of charcoal. To produce good quality charcoal, each production process is an important part. In determining the control of the raw material sawdust on the wet and dry control, charcoal charcoal furnace temperature control should also ensure that within the reasonable temperature scale to achieve high carbon content and smoke-free treatment to ensure that the mechanism of charcoal production and quality. Mechanism charcoal is usually used to machine the charcoal, the oldest charcoal burning method is to use clay kiln firing, because the kiln in the firing process for a long time, for the enterprise structure optimization is a drawback, the production of charcoal is still theoretically Choose the form of the material in the firing. Mechanism charcoal smoke-free tasteless, can achieve the role of logs and coal, charcoal machine production of raw materials is also very wide. Mechanism of charcoal easy to ignite, high calorific value, burning time is long, can be lit with ordinary paper, the mechanism of charcoal can be used raw materials are straw, sawdust, branches, rice husk, bamboo, peanut, sunflower hull, Rosewood, sugar cane bagasse, corn cob, coconut shell, coffee shell and other raw materials crushed by the molding machine after high temperature, high pressure plastic molding machine for the carbon semi-finished products, carbonized charcoal into the finished charcoal. China is a big agricultural country, so that waste into a high return. Annual crop shells, hard shells and other residues of hundreds of millions of tons, the current utilization rate of only 20%, most of the almond shell, peach ham, some shell crusted, etc. were thrown away. Use waste to re-use it to generate value.
Our products include: grinder, oil mill, trenching machine, harvesters, etc., welcome to visit.
TEL:+8613592505674
E-MAIL:sales@hwdcrusher.com
http://www.hwdcrusher.com
Our products include: grinder, oil mill, trenching machine, harvesters, etc., welcome to visit.
TEL:+8613592505674
E-MAIL:sales@hwdcrusher.com
http://www.hwdcrusher.com
