ENGLISH
CONTACT US
Ring hammer crusher for crushing various mid-hard and abrasive weak materials. Its compressive strength of the material is not more than 100MPa, and the moisture content is less than 15%. Broken materials as coal, salt, chalk, gypsum, brick, limestone. Also used for crushing fiber structure, strong flexibility and toughness of broken wood, paper or broken asbestos cement waste to recycling asbestos fiber. Ring hammer crusher main working parts with a hammer (also known as the hammer) rotor. Rotor from the spindle, disk, pin and hammer. The motor drives the rotor in the high-speed rotation of the crushing cavity. Material from the upper feed port to into the machine, by the high-speed motion hammer blow, impact, shearing, grinding and grinding. In the lower part of the rotor, with sieve plate, smaller than the mesh size fractions in the crushed material is discharged through the sieve, the coarse fraction larger than the mesh size sieve retention continue to be a hammer blow and grinding, and finally through the sieve board discharged outside the machine. Hammer crusher crushing materials by impact action to crushing process is roughly this material into the crusher, subjected to high-speed rotary hammer impact crusher, crushing the material obtained from the hammer at the kinetic energy rushed to the high-speed frame body baffles, sieve strip material colliding at the same time, have been repeatedly broken, the gap is smaller than the screen bars material discharged from the gap, the individual materials, on the screen bars again by the impact of the hammer bit, grinding, extrusion and crushing, the material is hammerhead extruded from the gap, thereby obtaining the desired particle size of the product.
Link: Crusher
